sscotty727

Hi All,

As you know, I've added inserts to my wedge shoes (the one in my avatar is an example). The problem is that while I've been able to increase the height with success, I've also decreased the amount of shoe holding the back of my heel into the shoe. That is all well and fine, except I was wondering if it would be possible to maybe get some leather and glue it to the inside of the back heel and perhaps add a strap to the shoe. I am not real concerned about the looks as it would be under my pant leg. Has anyone done this before?

Thanks,

Scotty

Dr. Shoe

Easily done but I suggest getting a shoe repairer to stitch it in if you can't do it yourself.

Or even a piece of elastic across the instep.

sscotty727

You don't think glueing it in would work? I was thinking the strap part that attached to the shoe could go all the way down and side the heel. That way my weight as I walked in them would also help hold it in place.

Dr. Shoe

But your foot is trying to come out of the shoe so the strap will probably come out with it.

sscotty727

Even with alot of Superglue? I wasn't under the impression my foot would "hold" it, just help reinforce it (it would be glued from the bottom and on the back). Just thought less of a pain than trying to sew it.

lorriette

have you thought about using a "D" shape strap with a buckle on the small ends and a hole for the heel to pass through?. Wear it like an ankle strap, unseen under jeans ect., yet easily removed or used with more than one pair.

__________________
feel the mood

sscotty727

That is a good idea for pumps or shoes with a heel. The ones I am talking about are wedges.

Here is some pics of the shoes so you can see how the the inserts have modified the height.

The first pic is a side view. You can see the original heel. My finger is pointing to where the heel is now.
http://i10.photobucket.com/albums/a1...edge_heel1.jpg

Here are two shots looking into the shoe.
http://i10.photobucket.com/albums/a1...edge_heel2.jpg
http://i10.photobucket.com/albums/a1...edge_heel3.jpg

And finally, you can see the shoes on my feet. Again, I am pointing to where my heel is.
http://i10.photobucket.com/albums/a1...edge_heel4.jpg

As you can see, I am able to wear them very comfortably, however, I think having a strap would help hold my foot in better. They stay in pretty well as it is since the front has elastic bands, but for added security, I would like to add a strap.

Scotty

hart88

did you take another wedge sole and glue it to your shoe? (or how did you make it)

a shoe fitters trick is to pull the insole (or socklining) up from the insole of your shoe, and find a cork or foam rubber "jimmie" that are usually found at shoe stores or shoe repair shops. (*don't glue it yet,*) just slide it under the socklining if you can, or just slide it into the shoe, and see if there is some resistance and the heel feels tighter, because it keeps your foot from sliding down into the shoe. (a thick piece of leather could also do the trick, but cork conforms to your foot better.) There are different thickness of the cork jimmies, also, so you might beg, borrow, or buy more than one pair....The reason we so don't glue it first, is the fact it is hard to dig that cork out again, if it doesn't work. One trick is to glue the cork jimmie to the insole while you have it out, then just slide the insole/socklining into the shoe. That way if it doesn't do the job, you can pull the cork jimmie off the insole better, ( or scrape it off easier)
(another quick trick is a tongue pad just out of view under the front part of the shoe where shoe laces usually are.)

about elastic straps, you can find Covered Gathered Elastic in many colors. I use that for quick fixes for the ladies who might have real small feet, and have to buy the wrong size larger to get the shoe they like. I can just sew it straight across like a tap dancers shoe, and many times it works, especially if the customer only needs the shoe for one occasion like a wedding, party, etc.
If you need a buckle, then I have to do more fittings with the customer to
to get the right angle, or length of elastic for the buckle, or length of strap.
I always have the customer try the strap on before I punch the holes in the strap for the customer, and then finish the strapping. (measure twice, cut once!)

__________________
Gene H.
Hartlandshoes
Saint Paul Minnesota
651-646-4326

sscotty727

Hi Gene,

Posted this in another thread:

I have a solution that works pretty well. I've been tinkering with ways to add "height" and I think I have finally came up with something easy that works well.

Basically I got a woman's Triad insert (or something like it). I find the women's work best then the men's since the men's are bulkier and add more lift to the front of the foot, which is what you DON'T want.

http://images.amazon.com/images/P/B0...CLZZZZZZZ_.jpg

Anyway, next I got a solid gel insert for just the heel (get one that has a little thickness and is solid, not real squishy). I can't find a pic of one online, but if you look most drug stores will carry both.

I then used SuperGlue to attach the gel insert to the back of the Triad insert (the triad will go on top). You can then put this into your shoe, and depending on how snug it fits, you can add some tape underneath (i found either double stick or duct tape work well) to hold it in place (if you use duct, do the trick of twisting it to make "double sided" tape"). Anyway, this won't give you a real high lift, but since it does add a little PLUS changes the arch of the fit, you do get a sensation of a higher heel and alot more comfort.

PM me if you have any other questions or need more details. I can try to take some pics later when I get a chance.

Scotty

------------------------------

Ok, here are a few pics.

First of all, here is how the shoe fits BEFORE the insert (I am pointing to where my heel is).
http://i10.photobucket.com/albums/a1...out_insert.jpg

Here is the normal Triad insert with no modifications.
http://i10.photobucket.com/albums/a1...27/insert1.jpg

Here is a modified Triad insert with the Gel Heel glued on it.
http://i10.photobucket.com/albums/a1...27/insert2.jpg

The shoe with the modified insert placed inside.
http://i10.photobucket.com/albums/a1...hoe_insert.jpg

And finally, you can see how the shoe fits with the new insert (I am pointing to where my heel is now).
http://i10.photobucket.com/albums/a1...ith_insert.jpg

-------------------------------

For the shoes in the avatar, I just added a few more Gel Heels in a row to give me more height.

Scotty

Dr. Shoe

Superglue might do the trick but make sure it is totally dry before wearing them. Also beware that the heat and sweat from your foot could affect the adhesion though I doubt it.